If you have been reading about size-exclusion chromatography and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Updated 2026-06-06. Numbers and descriptions here follow the published literature rather than marketing material.
Degree of hydrolysis is commonly estimated by titrating liberated carboxyl groups, measuring soluble nitrogen in trichloroacetic acid, or using o-phthaldialdehyde assays. Molecular weight distribution is often examined by size-exclusion chromatography, sodium dodecyl sulfate polyacrylamide gel electrophoresis, or mass spectrometry. These methods answer different questions: titration estimates bond cleavage, while chromatography describes peptide size ranges. Because no single reference method is universally applied, values reported by different laboratories may not be directly comparable. Method details such as calibration standards and sample preparation strongly influence results.
Routine quality control for hydrolysate powders includes total nitrogen or protein content by Kjeldahl or Dumas combustion, moisture by oven or Karl Fischer titration, ash, and mineral profiles. Microbiological tests typically cover total aerobic counts, yeasts, molds, and specified pathogens according to regional food safety rules. Amino acid analysis can quantify free amino acids and peptide-bound residues after hydrolysis. For products intended for special populations, additional tests may target residual lactose, fat, or specific allergenic proteins. Specifications are set by the manufacturer and may exceed general food-grade requirements.
Hydrolysate powders are hygroscopic and can absorb moisture during storage, which may promote caking, browning, and loss of solubility. Cool, dry conditions and sealed packaging slow these changes, while high humidity and warm temperatures accelerate Maillard reactions between peptides and residual sugars. Liquid hydrolysates are more perishable and often require refrigeration or preservatives. Shelf-life studies usually monitor moisture, color, solubility, free amino groups, and microbial load over time. Stability depends on residual lactose, water activity, packaging barrier properties, and the initial peptide profile.
Quality control for hydrolyzed whey protein focuses on composition, peptide size, and batch consistency. Protein content is commonly measured by Kjeldahl or combustion analysis, while moisture and ash are determined by gravimetric methods. Peptide molecular weight distribution is often assessed by size exclusion chromatography or mass spectrometry. The extent of hydrolysis can be estimated by titration, trinitrobenzenesulfonic acid assays, or formol titration. Because hydrolysis produces a complex mixture, no single test captures every relevant property, and laboratories often combine several methods.
Allergen testing is relevant because whey is a milk-derived ingredient. Immunoassays can detect residual milk proteins, but hydrolysis may alter or destroy antibody-binding sites, leading to false negatives or underestimation. Liquid chromatography with tandem mass spectrometry can identify specific peptide markers and is less dependent on intact protein epitopes. Regulatory labeling rules for milk allergens vary by country, and a product described as hydrolyzed is not automatically exempt from allergen declaration. For infants, specialized formulas require strict control of protein molecular weight and sterility, which adds testing beyond routine composition.
Physical properties such as particle size, bulk density, and reconstitution behavior affect handling and finished product quality. Water activity and moisture content influence shelf life; high moisture can promote caking, browning, and microbial growth. Color is monitored because Maillard reactions between peptides and reducing sugars can darken the powder during storage. Taste panels and instrumental methods may assess bitterness, which is a common challenge for hydrolysates. Specifications often include limits for heavy metals, microbiological counts, and residual fat, depending on the intended market.
| Property | Value | Notes |
|---|---|---|
| Moisture content | Typically below 6% | Higher moisture increases caking, browning, and microbial risk. |
| Water activity | Often below 0.6 | Low water activity limits microbial growth in dry powders. |
| Typical storage temperature | 15–25 °C | Keep sealed, dry, and away from strong odors and direct light. |
| Protein quantification | Kjeldahl or Dumas combustion | Measures total nitrogen; a conversion factor estimates protein. |
| Peptide size analysis | Size-exclusion chromatography or mass spectrometry | Results depend on method, calibration, and sample preparation. |
Advanced peptide profiling uses liquid chromatography coupled with mass spectrometry to identify fragments and assess batch consistency. Amino acid analysis after acid hydrolysis quantifies the building blocks and can reveal deviations from expected composition. Residual enzyme activity may be monitored in products where active enzymes are undesirable. Allergen tests often use immunoassays for beta-lactoglobulin, but hydrolysis can reduce or alter epitope recognition, so negative results do not prove absence of allergenic potential. Physical tests include particle size, bulk density, and reconstitution behavior.
Regulatory and labeling frameworks vary by country. In the United States, whey protein hydrolysate may be regulated as a food ingredient or a dietary supplement ingredient depending on intended use. In the European Union, it falls under general food law, with additional rules for infant formula and foods for special medical purposes. A claim of hypoallergenicity is not established by hydrolysis alone and generally requires clinical evidence. Open questions remain about how degree of hydrolysis relates to bitterness, nitrogen absorption, and residual allergenicity across different products and processing methods.
Testing hydrolysate powders typically begins with proximate analysis for moisture, ash, fat, and total nitrogen. Protein content is calculated from nitrogen using a conversion factor, most often Kjeldahl or Dumas combustion. Peptide size distribution is assessed by size-exclusion chromatography, reversed-phase HPLC, or mass spectrometry. Sodium dodecyl sulfate polyacrylamide gel electrophoresis can show residual intact protein bands. Free amino groups may be quantified by colorimetric assays to estimate cleavage extent, though different methods and laboratories are not always directly comparable.
Dry hydrolysate powders are generally stable when kept cool, dry, and sealed, while moisture uptake can cause caking, Maillard browning, and loss of solubility. Higher temperatures accelerate these changes and may alter flavor. Recommended storage conditions often fall between 15 and 25 degrees Celsius with relative humidity below 60 percent. Once reconstituted, liquid hydrolysate solutions support microbial growth and may develop bitterness or haze over time. Packaging in moisture-barrier containers with desiccants helps maintain quality during transport and warehouse storage.
Quality control for hydrolysate ingredients focuses on identity, purity, and consistency, with specifications that may include total protein, hydrolysis level, molecular weight distribution, microbiological limits, heavy metals, and allergen labeling. In some jurisdictions, partially and extensively hydrolyzed formulas are regulated as foods for special dietary uses or as infant formula ingredients. Regulatory status varies by country and intended use. Documentation such as certificates of analysis, safety data sheets, and method validation records supports traceability. Open questions remain about standardizing hydrolysis measurements across suppliers and laboratories.
After translation, the AGP protein backbones are highly decorated with complex carbohydrates, primarily type II AG polysaccharides. The biosynthesis of the mature AGP involves cleavage of the signal peptide at the N-terminus, hydroxylation on the P residues and subsequent glycosylation and in many cases addition of a GPI-anchor. Glycosylation of the AGP backbone is suggested to initiate in the ERTooltip endoplasmic reticulum with the addition of first Gal by O-galactosyltransferase, which is predominantly located in ER fractions. Chain extension then occurs primarily in the GA. For those AGPs that include a GPI anchor, addition occurs while co-translationally migrating into the ER.
Bactericidal permeability-increasing protein (BPI) is a 456-residue (~50kDa) protein that is part of the innate immune system, coded for in the human by the BPI gene. It belongs to the family of lipid-binding serum glycoproteins. BPI was initially identified in neutrophils, but is found in other tissues including the epithelial lining of mucous membranes. It is an endogenous antibiotic protein with potent killing activity against Gram-negative bacteria. It binds to compounds called lipopolysaccharides produced by Gram-negative bacteria. Lipolysaccharides are potent activators of the immune system; however, BPI at certain concentrations can prevent this activation. BPI was discovered by Jerrold Weiss and Peter Elsbach at New York University Medical School.
However, β-strands are rarely perfectly extended; rather, they exhibit a twist. The energetically preferred dihedral angles near (φ, ψ) = (–135°, 135°) (broadly, the upper left region of the Ramachandran plot) diverge significantly from the fully extended conformation (φ, ψ) = (–180°, 180°). The twist is often associated with alternating fluctuations in the dihedral angles to prevent the individual β-strands in a larger sheet from splaying apart. A good example of a strongly twisted β-hairpin can be seen in the protein BPTI. The side chains point outwards from the folds of the pleats, roughly perpendicularly to the plane of the sheet; successive amino acid residues point outwards on alternating faces of the sheet.
Sources: en.wikipedia.org
The structure of the AG glycans consists of a backbone of β-1,3 linked galactose (Gal), with sidechains of β-1,6 linked Gal and have terminal residues of arabinose (Ara), rhamnose (Rha), Gal, fucose (Fuc), and glucuronic acid (GlcA). These AG glycan moieties are assembled by glycosyltransferases (GTs). O-glycosylation of AGPs is initiated by the action of Hyp-O-galactosyltransferases (Hyp-O-GalTs) that add the first Gal onto the protein. The complex glycan structures are then elaborated by a suite of glycosyltransferases, the majority of which are bio-chemically uncharacterized. The GT31 family is one of the families involved in AGP glycan backbone biosynthesis. Numerous members of the GT31 family have been identified with Hyp-O-GALT activity and the core β-(1,3)-galactan backbone is also likely to be synthesized by the GT31 family. Members of the GT14 family are implicated in adding β-(1,6)- and β-(1,3)-galactans to AGPs. In Arabidopsis, terminal sugars such as fucose are proposed to be added by AtFUT4 (a fucosyl transferase) and AtFUT6 in the GT37 family and the terminal GlcA incorporation can be catalysed by the GT14 family. A number of GTs remain to be identified, for example those responsible for terminal Rha.
Afucosylated antibodies are intensely used in the field of advanced medicine, also due to their high ADCC (antibody-dependent cellular cytotoxicity). This makes them effective in binding to specific targets while minimizing damage to surrounding tissue. Some of the fields in which afucosylated antibodies are used or considered for application are: cancer immunotherapy autoimmune diseases Infectious diseases Furthermore, afucosylated antibodies are used as diagnostic tools and play a role in the development of personalized medications.
AlphaKnot is a scientific database and web server for detecting, classifying, and visualizing protein knots and other forms of protein-chain entanglement. It was developed to facilitate the analysis of protein structures predicted by AlphaFold and other machine-learning methods, but can also be used to analyze experimentally determined structures. The current version, AlphaKnot 2.0, combines two closely related components: a precomputed database containing proteins identified as knotted in large-scale structure-prediction datasets, and an analysis server that allows users to investigate the topology of individual protein structures in greater detail.
Aspartate transaminase (AST) or aspartate aminotransferase, also known as AspAT/ASAT/AAT or (serum) glutamic oxaloacetic transaminase (GOT, SGOT), is a pyridoxal phosphate (PLP)-dependent transaminase enzyme (EC 2.6.1.1) that was first described by Arthur Karmen and colleagues in 1954. AST catalyzes the reversible transfer of an α-amino group between aspartate and glutamate and, as such, is an important enzyme in amino acid metabolism. AST is found in the liver, heart, skeletal muscle, kidneys, brain, red blood cells and gall bladder. Serum AST level, serum ALT (alanine transaminase) level, and their ratio (AST/ALT ratio) are commonly measured clinically as biomarkers for liver health. The tests are part of blood panels. The half-life of total AST in the circulation approximates 17 hours and, on average, 87 hours for mitochondrial AST. Aminotransferase is cleared by sinusoidal cells in the liver. Aspartate transaminase catalyzes the interconversion of the natural amino acid, L-aspartic acid and α-ketoglutaric acid to give oxaloacetic acid and L-glutamic acid.:
Sources: en.wikipedia.org
Peptide size is commonly estimated by size-exclusion chromatography, gel electrophoresis, or mass spectrometry. These techniques separate or identify molecules according to mass or hydrodynamic volume. Results depend on calibration and method conditions, so they are best compared within the same analytical protocol.
Clumping usually reflects moisture uptake by hygroscopic peptides and residual lactose. High humidity, temperature fluctuations, and damaged packaging can worsen caking. Sealed containers with desiccant and controlled storage reduce the problem.
No universal reference method exists for all hydrolysates, although several established assays are used. Different methods measure different chemical features and can produce different numerical values. For this reason, specifications should state the assay and laboratory conditions.
Size exclusion chromatography separates peptides by molecular size in solution, and mass spectrometry can provide more detailed mass information. Results are usually reported as a distribution rather than a single value. Method choice and calibration affect the reported range.